Nuts About You card

This another project I made for the Cricut challenge.  I used Create a Critter 2 for this.  I sized the acorn at 5" and cut 2 of them, one of them was flipped.  I tried to weld it in CCR, but it would not work, so I cut 2 and scored the back of the flipped one and glued the top part of it down to the front.  I ran the layers through the cuttlebug and inked the edges.  It is put together with foam tape.  The tag was just resized in CCR to fit the stamp, which is from My Pink Stamper.